E-4
B. USB POWER
This unit can also be powered using the DC IN jack (#12) and a USB power source (not
included) like a cell phone charger, computer USB port or USB power bank. A USB to
DC plug cable is also required (included).
- Use a USB power source with a minimum output of DC 5V 500mA.
- Plug one end (DC plug) of the provided cable into the DC IN JACK (#12) and the other
end of the cable to the USB charger/power bank/computer (not included).
-
The battery source will automatically be disconnected when using the USB port for
powering the unit.
C. AC ADAPTOR OPERATION (AC ADAPTOR NOT INCLUDED)
1. Plug the cord of the AC adaptor into the DC IN JACK (#12) of the MCR-60.
2. Plug the AC adaptor into a household 120V/60Hz AC power outlet.
3. The batteries will automatically disconnect when the AC adaptor is plugged into the
MCR-60 and the unit will operate using the AC adaptor power.
NOTE: Only use adaptor with an output voltage
rated at DC 5V
600mA with a
center positive plug.
RADIO OPERATION
2 Plug the included earbuds into the STEREO HEADPHONE JACK (#8) located on the
unit, and place the earbuds in your ears.
2 Switch the FUNCTION SELECTOR (#20) to "AM" or "FM" for the desired band.
2 Rotate the TUNING CONTROL (#10) to select the desired radio station.
2 Adjust the VOLUME CONTROL (#18) to obtain the desired sound level.
2 To turn the radio off, switch the FUNCTION SELECTOR (#20)
to “TAPE”.
TIPS FOR BEST RADIO RECEPTION
1. During FM or FM Stereo reception,
a. When you listening with the built-in speaker (#2), always keep the TELESCOPIC
ANTENNA (#5) fully extended for best performance. However, if FM reception is
weak, try repositioning the unit near an open window until you get the best
reception.
b. When you listening with the earbuds, the cord of the earbuds works as an external
FM antenna. To insure maximum FM tuner reception, always keep the earbuds
cord fully extended. Do not wind or fold the earbuds cord while listening to the
radio
2 When tuning a station in AM band, be sure to place the unit in a vertical position. For
maximum AM tuner reception, keep turning the unit slowly while keeping it vertical
until the best reception is obtained.
