E-3
13 STOP
BUTTON
17 RECORD BUTTON
14 PLAY BUTTON
18 VOLUME CONTROL
15 FAST FORWARD
BUTTON
19 BUILT-IN MIC
16 REWIND
BUTTON
20 FUNCTION SELECTOR
(TAPE/FM/AM)
POWER SOURCE
The MCR-60
operates on two 1.5V DC “AA” size (UM-3) alkaline batteries (Not Included)
or an AC-DC adaptor with 5V DC ~ 600mA output (Not Included).
A. BATTERY OPERATION (BATTERIES NOT INCLUDED)
1.
Open the battery door located on the back of the unit.
2. Follow the polarity diagram (+ and -) shown on the back of the cabinet, and insert
2 'AA' (UM-3) batteries, and close
the battery door.
IMPORTANT:
Be sure that the batteries are installed correctly. Wrong polarity could
damage the unit and void the warranty.
Notes:
1.)
For best performance and longer operating time, we recommend the use of
good quality alkaline battery.
2.)
The batteries need to be replaced when if the volume level becomes
significantly lower, if the sound is distorted during operation or the unit no
longer functions properly.
BATTERY WARNING
•
Be sure the batteries are installed correctly. Wrong polarity may damage the unit.
•
Use only the size and type of batteries specified.
•
Do not mix old and new batteries.
•
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
•
If the unit is not to be used for an extended period of time, remove the batteries. Old
or leaking batteries can cause damage to the unit and may void the warranty.
•
Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturer’s directions).
•
Do not dispose of batteries in fire, batteries may leak or explode.
13
14
15 16
17
18
19
20
