6
tape while it’s recording (recommended), you can plug your headphones into the
HEADPHONE JACK (#3) or monitor it using your computers speakers.
Note:
If another program opens up other than the CassetteMate software when you plug your
JSCR-50 into the computer, click “Cancel” or “Close” to exit and return to the CassetteMate
software. To insure a good quality transfer, make sure all other programs are closed while
recording.
3.
Inserting and Preparing the Cassette Tape:
Open the cassette door on the JSCR-50 by sliding the EJECT Switch (#1) down. Insert a
tape into the JSCR-50 and close the door until it clicks.
4. Rewind the tape to the position where you would like to begin recording, making sure to
allow a few extra seconds of silence to minimize unwanted trimming.
5. From the Cassette-Mate software window, click the Tools
button. If the
icon shows
in the lower right corner of your desktop and there are two green lines visible in the audio
wave box of the software, you are ready to begin converting your tapes to MP3s! If not,
see the FAQ section for additional information.
6.
Audio Adjustments:
Adjust the audio level prior to recording by clicking the
icon. You can adjust the settings
for file type (wav, MP3 or wma), bit rate 32 kbps – 320 kbps (128kbps default) and record
path (where your files will be saved). On the JSCR-50, you can choose whether or not you
would like the tape to loop over to the other side automatically by setting the PLAY MODE
(#9) to double arrows or single arrow icon.
7.
Familiarize Yourself with the Software:
A. Audio
Wave:
If two green bars are present, the JSCR-50 is connected correctly. If green
bars are moving and showing a wave pattern, playback is being detected.
B.
Содержание JSCR-50
Страница 1: ......
