E-6
REMOTE CONTROL
Remove the protective tab to activate remote
The Remote Control has a pre-installed lithium
CR2032 battery. Remove the protective tab to
activate the remote control
.
Battery Installation
1. Use a screwdriver to remove the screw (#A).
2. Remove the battery compartment cover (#B).
3. Place the battery into the battery compartment.
4. Make sure that the side marked with + is facing
up.
5. Replace the battery compartment cover (#B).
6. Use a screwdriver to secure the screw (#A).
Note :
1. If the remote control does not work properly,
replace the battery.
WARNING
:
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD.
The remote control supplied with this product contains a coin/button cell battery. If
the coin/button cell battery is swallowed, it can cause severe internal burns in just
2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does
not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
1
8
MOVIE
2
COAX
9
MUTE
3
OPTICAL
10
4
11
5
12
6
PAIR
13 AUX/RCA
7
MUSIC
14 BT
