12
LISTENING TO YOUR iPhone/iPod
Dock your iPod/iPhone into the unit
Carefully place your iPhone/iPod into the docking bay by placing the connector on the
bottom of the iPhone/iPod onto the connector in the docking bay.
NOTE:
Remember to remove any bumper you may have installed on the iPhone 4
before inserting it onto the docking connector.
PLAYBACK
1. Press the
button to turn on the unit.
2. Tap the SOURCE button to select iPod mode, the “iPod” icon appears on the LCD
display and then press the PLAY/PAUSE
button to start playback.
3. Press the PLAY/PAUSE
button to pause or resume playback.
4. Press the / - button to adjust your desired volume level
NOTE:
The volume level cannot be adjusted by the volume control on your
iPod/iPhone after being docked.
5. Tap the
or
button to select the desire music track.
6. Press and hold the
or
button for fast-forwarding or fast-rewinding during
playback.
7. To remove the iPhone/iPod from the unit, press and hold the PLAY/PAUSE
button for five seconds to switch off the device and then gently remove it from the
docking connector.
8. Press and hold the
POWER button to turn off the unit.
CHARGING
Your iPhone/iPod will charge in all function modes when docked.
NOTE:
To prevent damaging of the dock connector, never twist the iPhone/iPod when
inserting or removing it.