9
ALARM SETTING
1. Tap the ALARM 1
or ALARM 2
button once to check the alarm time and
wake up option (iPod, Beeping Alarm, Radio).
2. In standby mode, press and hold the
or
button for 3 seconds when the
alarm time is showing. The hour digits will blink.
3. Tap the
or
button to adjust the hour. Press and hold the button for fast
advance / reverse setting.
4. Press the
or
button to confirm the hour setting, the minute digits will flash
to prompt for input.
5. Tap the
or
button to adjust the minute. Press and hold the button for fast
advance / reverse setting.
6. Press the
or
button to confirm the minute setting, the alarm sound icons
will flash.
7. Tap the
or
button to select the wake up option (iPod, ALARM, Radio
).
8. Press the
or
button again to complete the alarm setting. The alarm
indicator
or
will appear to indicate it is enabled.
9. To disable the alarm, in Standby mode, tap the
or
button twice for the
alarm you want to disable, relative alarm indicator will disappear from display. Tap
the
or
button twice again will enable the alarm.
Note:
The alarm will automatically switch to the beeping alarm if you selected wake to
iPod/iPhone but do not have an iPod or iPhone docked,
If you select wake to Radio, make sure your radio station is set to the one you want
to be woken up to. The JiMS-75i will play the last radio station you listened to when
the wake time is reached.
The unit features a crescendo wake up for the beeping alarm, radio or iPod/iPhone.
When the alarm time is reached, the sound will increase gradually from a very low
level and increase to a louder level. When waking to radio and iPod/iPhone, the
preset volume level will be the loudest level and it will reach after about 30
seconds.
