Jensen JensenGrill Estate 2.1 Скачать руководство пользователя страница 8

Страница: 8 / 16

el: J

rill E

sta

te 2
.1 E
ng

lis

h 2
01

JensenGrill - Coal/briquette and gas combination grill

Put 23 into the grill

(23) is pushed into the two rails at the top of the cabinet.

Fitting the gas hose and regulator (39)

Regulator, hose and connections vary from country to country.

In some countries the adapter is mounted (European commen

connector) on the hose, which can be mounted on the grill.

Moist the hose connection on the regulator and adapter, so

they are easier to mount on the hose. Put the clamps on both

ends and tighten.

IMPORTANT! The thread on the gas connectors on the grill is

left thread (tighten counterclockwise).

Be aware that the regulator must be approved for the current

gas pressure and gas mixture.

Installation of gas hose should be in accordance with the

national rules.

Drag a safety chain through the two holes on the back of the grill

onto something solid and secure the grill with a lock, to secure

against theft.

A. INSTALLING EXTRA EQUIPMENT

Installation of the gas cylinder compartment

1 pcs. Gas cylinder compartment (13)

2 pcs. U-profiles (15)

1 pcs. Gas cylinder locking pin (14)

8 pcs. Screws (S21)

1 pcs. Gas cylinder spacer (51)

1 pcs. Screw (S23)

Install u-profiles on the gas cylinder compartment.

Place (13) (gas cylinder compartment) on top of (15) (u-profiles)

and make sure that the four holes in the bottom of gas con-

tainer compartment match with the holes in (15) (u-profiles).

Secure loose u-profiles for gas container compartment with

four M6 10mm screws.

Open the door on the grill and proceed the gas cylinder compart-

ment installation,

Installing the gas container compartment on the grill.

Place the gas cylinder compartment to the left side of the grill

(front view) and shoot u-profiles into the brackets under the grill.

When the gas cylinder compartment is in place, mounted on

the grill by means. (15) being fitted from the inside of the cover

cylinder with an M6 screw 50mm. Attach (15) (u-profiles) with

four M6 10mm screws. Tighten all screws at the end.

Slide (14) into the two slots on the back of the gas cylinder

compartment to secure the gas container.

Содержание JensenGrill Estate 2.1

















Результаты поиска

Содержание JensenGrill Estate 2.1

Отзывы:

Похожие инструкции для JensenGrill Estate 2.1

Бренды по названию

Популярные бренды

Jensen JensenGrill Estate 2.1, Руководство пользователя

Результаты поиска

Содержание JensenGrill Estate 2.1

Отзывы:

Похожие инструкции для JensenGrill Estate 2.1

Бренды по названию

Популярные бренды