Jensen JCR-375, Руководство пользователя

Страница: 7 / 17

E-6
1. / ALARM 1 BUTTON 15. ALARM 1 INDICATOR
2. VOLUME- / ALARM 2 BUTTON 16. ALARM 2 INDICATOR
3. TIME BUTTON 17. RANDOM PLAY INDICATOR
4. SLEEP BUTTON 18. LED DISPLAY
5. DIMMER BUTTON 19. PM INDICATOR
6. POWER / FUNCTION BUTTON
20. SLEEP INDICATOR
7. SN0OZE BUTTON 21. PROGRAM INDICATOR
8. PLAY/PAUSE BUTTON 22. REPEAT INDICATOR
9. STOP BUTTON
23. EARPHONE JACK
10. MODE BUTTON 24. AUX IN JACK
11. PROGRAM BUTTON 25. DC IN JACK
12. BUTTON 26. USB CHARGING PORT
13. BUTTON 27. FM ANTENNA
14. POWER INDICATOR 28. BACK UP BATTERY COMPARTMENT
POWER SOURCE (AC ADAPTOR ONLY)
The unit is powered by an external 120V AC adaptor with an output of D C 5V / 3A.
The unit is also equipped with a battery back-up system for the clock that is powered by
2 x ‘AAA’ (UM-4) batteries (Not included).
POWER CONNECTION
1. Plug the cord of the power adaptor into the DC IN JACK (#25) located on the back of the
unit.
2. Plug the power adaptor into a household wall socket. The unit is powered up and in
standby mode when you see the display turn on and begin flashing.
Battery Back-up system
•
The unit is equipped with a battery back-up system that will save your clock settings
in case of a power outage. It requires 2 x ‘AAA’ (UM-4) batteries (Not included).
•
Open the battery door on the bottom of the unit. Insert the batteries into the
BACK UP BATTERY COMPARTMENT (#28) and make sure the positive and
negative (+ or -) sides of the batteries are in contact with the corresponding terminals
in the BACK UP BATTERY COMPARTMENT (#28). Replace the battery door.
•
The clock display will not operate during a power outage.
•
If a power outage occurs; the display will turn off and the unit will switch to the battery
back-up that will save your clock settings.
•
Once power is restored, the display will light up flash to alert you that a power outage
occurred. The flashing display happens whether batteries are installed or not.
•
When replacing the battery, do not disconnect the power adaptor. If you unplug the
power adaptor and then take out the battery, all clock and alarm settings will be lost.
Note:
The unit will still operate without the batteries installed, but the time and alarm settings
will be lost and have to be reset in the event of a power interruption or failure.