![background image](http://html1.mh-extra.com/html/jensen/jcr-370/jcr-370_user-manual_3710847006.webp)
ACCESSORIES INCLUDED
Carefully remove the unit and all accessories from the display carton.
Please verify that you have all the following accessories before recycling the gift
box.
• User Manual
• AC Adaptor
POWER SOURCE
This unit is designed to operate on an external AC adaptor rated at 5V 2100mA
(included). Operating this unit on any other power source may cause damage to the
unit, and such damage is not covered by your warranty.
It’s also equipped with a battery back-up system for the clock that is powered by 1 x
3V type CR2032 Lithium battery (not included).
AC-DC Adaptor Connection
An AC-DC Adaptor with the output 5V 2100mA (Included) is required for
operating the main unit. To connect the AC-DC Adaptor to the unit and 120V~ 60Hz
AC Outlet:
1. Firmly and securely insert the DC plug of the adaptor into the
DC IN Jack
at the
back of the unit.
2. Plug the adaptor’s AC plugs into a power outlet rated at 120V~ 60Hz.
Battery Backup for Clock
The radio is equipped with a clock backup system. It requires a 3 V lithium battery
(type: CR2032). The backup battery compartment is located at rear of the unit.
1. Use a screw driver to loose the battery compartment lid screw.
2. Carefully to open the battery compartment lid by pull it out.
3. Install a DC 3V CR2032 type Lithium battery (with the polarity plus “+” side
facing up) the battery into the battery compartment and make sure the positive
and negative (+ or -) sides of the battery are in contact with the corresponding
terminals in the battery compartment.
E-5