PRESET RADIO STATIONS
1. Press the button on main unit to turn on the unit.
2. Tap the
SOURCE
button to select Radio mode.
3. Tune to the desired radio station either by “manually” or “automatically” tuning
method.
4. Press and hold the PRESET button on main unit; the next available preset
memory number flash in the LED display. (Note:”P01” will blink in the display if
you are programming preset for first time)
5. Tap the or button to select the preset number you want to assign the station
to.
6. Tap the button to confirm the setting.
7. Repeat step #3 thru # 6 to preset up to 10 stations.
RECALLING PRESET MEMORY CHANNELS
In radio mode, recall the pre-set channels by tapping the button repeatedly.
NOTE:
The clock and radio station presets will need to be reset if the power is interrupted
or in the event of a power outage. Please follow above steps 1-7 above to resave
the preset stations.
SLEEP OPERATION
The sleep timer allows you to turn the unit off after a designated time is reached.
1. To activate the sleep timer, turn the unit on and tap the
SOURCE
button to select
FM radio, nature sound or listening to music via AUX IN.
2. Tap the
SLEEP
button, the sleep time will appear on the display.
3. Repeatedly tap the
SLEEP
button to select a sleep time. The unit will turn off
after 15, 30, 60 or 90 minutes. Wait for 10 seconds after your selection for the
unit to confirm the selection, the unit will play for the selected length of time then
automatically turn off.
4. To cancel the sleep timer, tap the button repeatedly until timer shows “OFF”.
5. To turn the unit off before the selected length of time, press the
POWER
button at any time.
Notes:
1.) To check the remaining sleep time, tap the button once.
2.) If you are falling asleep to music from an external device connected to the AUX
input, the sleep timer will shut off the power to this system but it will not turn off
the external device.
AUXILIARY INPUT OPERATION
This unit features an auxiliary audio signal input jack for connecting external audio
devices like MP3 players, Digital Audio Device and listen to them through the
speakers of this unit.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of
the cable.
2. Plug one end into the
AUX IN
jack on the main unit and the other end of the
cable into the Line-out Jack or Headphone Jack of your external audio device.
3. Turn on the unit and external audio device.
E-12
