CHARGING YOUR SMART PHONE OR PORTABLE DEVICE
This unit features a 1 AMP USB port on the top of the unit for charging your portable
device (iPod, iPhone, Android phone, etc.) when used with the USB charging cord
that came with your device.
1. Plug one end of the USB cable (not included) into the USB Charging Port
located on the back of the unit. Plug the other end of the cord into the device you
wish to charge.
2. Observe the battery charge indicator on your device to make sure the charging
process starts normally.
3. Unplug the cable when your device is fully charged.
CAUTION:
Before charging, please refer to the user manual of the device you wish to charge
to make sure the charging current requested does not exceed 1A (1000mA).
Overloading the charging circuit may damage the unit permanently and void the
warranty.
1. The USB charging port of this unit supplies a DC 5V output at 1000 mA
maximum current to charge your smart phone or portable device battery and it
cannot support any other voltage range.
2. Make sure the device you want to charge has a battery charge rating of DC 5V
only.
3. The USB port of this unit is designed for smart phone or portable device battery
charging only and it cannot support data transfer or connect to computer.
4. Do not connect the USB port of this unit to other external power charger USB
ports, it may damage both units and void the warranty.
Note:
1.) Some smart phones and portable devices use proprietary USB connections and
circuitry, so they may not charge when plugged into the USB port. Please refer
to your device user manual before you attempt to charge them.
2.) It is normal if the unit gets warm while the USB port is in use and charging your
smart phone or portable device.
3.) Do not charge your smart phone over 12 hours continuously. Disconnect your
smart phone or other portable device from the USB cord once it is fully charged.
CARE AND MAINTENANCE
1. If the cabinet becomes dusty, wipe the exterior with a soft dust cloth only. Never
use dusting sprays or polishes on the cabinet.
2. If the cabinet becomes dirty or smudged with fingerprints it may be wiped with a
soft cloth that has been slightly dampened with a mild soap and water solution.
3. To prevent fire or shock hazard, always disconnect the power cord from the AC
outlet before cleaning.
CAUTION:
Never allow any water or other liquids to get inside the unit while
cleaning.
Note:
If there is no battery in the back-up battery compartment, the Time and Alarm
settings will be lost when the AC adaptor is disconnected for cleaning. Reset the
clock and wake up time after reconnecting the AC adaptor power.
E-14
