E-12
Notes:
Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth
enabled devices for Bluetooth operation since it may vary from model to model.
If your Bluetooth enabled device does not support A2DP profile, it will not play the
music through the speaker, even if paired (linked).
Remember to turn off the JCR-298 when you have finished listening.
Don't forget to switch off the power of your external audio device as well.
AUX IN OPERATION
You can play other music sources (iPod, MP3 or other digital audio players) through
the speaker of
the
JCR-298 by connecting the AUX IN JACK (#14) to your external
player’s audio out jack or headphone jack.
1. Plug one end of an audio cable (not included) into the AUX IN JACK (#14) and the
other end of the cable to the headphone jack of your digital audio player
.
2. Tap the SOURCE/STANDBY BUTTON (#2) to turn the unit on.
3. If you repeatedly tap the SOURCE/STANDBY BUTTON (#2), you will step
through the different modes available:
FM Radio -> AM Radio -> Bluetooth (bt) - > AUX
4. Tap the SOURCE/STANDBY BUTTON (#2) repeatedly to select AUX mode
.
5.
“AUX” will show on the LED Display (#11).
6.
Turn on and s
tart playing the external device you plugged into the AUX IN JACK
(#14).
7. Slowly adjust both the volume controls of the JCR-298 and the external device until
you reach a comfortable listening level.
Notes:
•
If you connect
the
unit to the Line-Out Jack on your external device, you only need
to adjust the volume control of your unit. If you connect to the Headphone Jack of
your external device, you may need to adjust both the volume controls of your
external device and
the unit
to obtain the desirable listening level.
•
Remember to turn off the unit when you have finished listening. Don't forget to
switch off the power of your external audio device as well.
SLEEP OPERATION
The SLEEP TIMER feature allows you to turn off the radio automatically after a
designated time has elapsed.
1. Select Radio Mode, Bluetooth Mode or AUX Mode and begin playing music from
the selected source.
2. Tap the SLEEP BUTTON (#1) to enter sleep mode.
3. Repeatedly tap the SLEEP BUTTON (#1) to select the sleep timer 120 – 90 – 60 –
45 - 30 – 15 – OFF (in minutes). The unit will play for the selected length of time
then turn off automatically.
4. To cancel the sleep timer, repeatedly tap the SLEEP BUTTON (#1) until the timer
shows OFF.
5. To turn the unit “Off” before the selected length of time, press and hold the
SOURCE/STANDBY BUTTON (#2)
at any time.
Note:
Tap the SLEEP BUTTON (#1) once to check the remaining sleep time.
