E-11
To set / recall the radio presets:
The unit allows you to store up to 10
FM s
tations and 10 AM stations for easy recall at
any time.
1. If you repeatedly tap the SOURCE/STANDBY BUTTON (#2), you will step through
the different modes available:
FM Radio -> AM Radio -> Bluetooth (bt) - > AUX
2. Tap the SOURCE/STANDBY BUTTON (#2) repeatedly to select either FM or AM
radio mode.
3. Tap the SKIP BACKWARD
BUTTON (#5) or SKIP FORWARD
BUTTON
(#6)
to select the desired station.
4. Press and hold the PAIR / PRESET BUTTON (#8) until “PXX” shows on the LED
DISPLAY (#11).
5. Tap the SKIP BACKWARD
BUTTON (#5) or SKIP FORWARD
BUTTON
(#6)
to select a preset number (P01-P10).
6. Press the PAIR / PRESET BUTTON (#8) again to confirm the preset.
7. Repeat steps 2 through 6 to preset up to 10 stations.
8. To recall one of the preset stations already programmed, tap the PAIR / PRESET
BUTTON (#8) repeatedly until you reach the desired preset number/radio station.
9. You can also recall one of the preset stations by pressing the PAIR / PRESET
BUTTON (#8) once and then press the SKIP BACKWARD
BUTTON (#5) or
SKIP FORWARD
BUTTON (#6)
to select a preset station.
BLUETOOTH OPERATION
Pairing a Bluetooth enabled device with the JCR-298.
1. Tap the SOURCE/STANDBY BUTTON (#2) to turn the unit on.
2. If you repeatedly tap the SOURCE/STANDBY BUTTON (#2), you will step through
the different modes available:
FM Radio -> AM Radio -> Bluetooth (bt) - > AUX
3. Tap the SOURCE/STANDBY BUTTON (#2) repeatedly to select Bluetooth mode.
4. “bt” will show on the LED DISPLAY (#11) and the Bluetooth indicator will turn on
and flash.
5. Turn on the Bluetooth function of your device and enable the search or scan
function to find the JCR-298.
6. Select the JCR-298 from the device list when it appears on your device’s screen. If
required, enter the pass code “0000” to pair (link) the JCR-298 with your device.
7. If you are pairing (linking) your computer to the JCR-298 using Bluetooth, you may
need to set the JCR-298 as your computer’s default sound device.
8. After pairing the JCR-298 with your Bluetooth device successfully, The Bluetooth
indicator
will light steadily.
9.
If you want
the
JCR-298 to pair with another Bluetooth device, press and hold the
PAIR / PRESET BUTTON (#8) until the Bluetooth
indicator
flashes. The unit will
go into Pairing/Discoverable mode.
10.
Repeat steps 4 & 5.
Now you can play music from your Bluetooth device wirelessly to
the
JCR-298.
1.
Select a song and press the Play/Pause Button on your Bluetooth device or
PLAY/PAUSE
(#7) on the JCR-298 to play or pause the Bluetooth device
playback.
2.
Tap the SKIP BACKWARD
BUTTON (#5) or SKIP FORWARD
BUTTON
(#6)
to select the Previous or Next track.
3.
Slowly adjust both the volume controls on the JCR-298 and on the Bluetooth device
until you reach a comfortable listening level.
