E-11
4. Press and hold the MEMORY BUTTON (#14) until “XX” (the existing preset slot)
and the MEMORY INDICATOR (#8) will blink.
5. Tap the
UP BUTTON (#19) or
DOWN BUTTON (#11) to select a preset
number (01-10).
6. Press the MEMORY BUTTON (#14) again to confirm the preset.
7. Repeat steps 2 through 6 to preset up to 10 FM stations and 10 AM stations.
8. To recall one of the preset stations already programmed, tap the MEMORY
BUTTON (#14) repeatedly until you reach the desired preset number/radio station.
SLEEP OPERATION
The SLEEP TIMER feature allows you to turn off the radio automatically after a
designated time has elapsed.
1. Press the RADIO ON BUTTON (#13) to turn on the radio.
2. Tap the
UP BUTTON (#19) or
DOWN BUTTON (#11)
to select the desired station.
3. Double tap the SLEEP TIMER BUTTON (#13) to enter sleep mode. The SLEEP
TIMER INDICATOR (#4) will light.
4. Repeatedly tap the SLEEP TIMER BUTTON (#13) to select the sleep timer 05 –
10 – 15 - 30 – 45 – 60 - 75 – 90 – OFF (in minutes). The unit will play for the
selected length of time then turn off automatically.
5. To cancel the sleep timer, repeatedly tap the SLEEP TIMER BUTTON (#13) until
the timer shows OFF.
6. To turn the unit “Off” before the selected length of time, press the RADIO OFF
BUTTON (#15) at any time.
Note:
In clock time display mode, double tap the SLEEP TIMER BUTTON (#13) once
to check the remaining sleep time.
USB CHARGING
THE JCR-255 FEATURES A FRONT MOUNTED USB CHARGING PORT (DC 5V
2A) FOR CHARGING YOUR CELL PHONE.
1. Plug the standard end of the USB cable (not included) into the USB
CHARGING
PORT (#9) located on the front of the unit. Plug the other end of the cable into the
device you wish to charge.
2. Observe the battery charge indicator on your device to make sure the charging
process starts normally.
3. Unplug the cable when your device is fully charged.
WARNING!
The USB CHARGING PORT (#9) located on the front of the unit is designed for a
smart phone or portable device battery charging only and does not support data
transfer or connection to a computer.
Don’t connect the USB CHARGING PORT (#9) of the unit to another USB charger.
It may damage both units and void the warranty.
