E-9
ALARM OPERATION
The JCR-255 features a dual alarm clock.
Setting the alarm time:
1. In standby mode, press the ALARM SET BUTTON (#16), one of the alarm 1
indicators will light and the hour of the alarm 1 time will blink.
2. Tap
the
UP BUTTON (#19) or
DOWN BUTTON (#11)
to set the hour. Press
and hold the buttons for fast advance/reverse setting.
3. Tap the ALARM SET BUTTON (#16) to confirm the hour setting, the minute digits
will blink to prompt for input.
4. Tap
the
UP BUTTON (#19) or
DOWN BUTTON (#11)
to set the minute.
Press and hold the button for fast advance/reverse setting.
5. Tap the ALARM SET BUTTON (#16) to to confirm the minute setting. One of the
alarm 2 indicators will light and the hour of the alarm 2 time will blink
6. Tap
the
UP BUTTON (#19) or
DOWN BUTTON (#11)
to set the hour. Press
and hold the buttons for fast advance/reverse setting.
7. Tap the ALARM SET BUTTON (#16) to confirm the hour setting, the minute digits
will blink to prompt for input.
8. Tap
the
UP BUTTON (#19) or
DOWN BUTTON (#11)
to set the minute.
Press and hold the button for fast advance/reverse setting.
9. Tap the ALARM SET BUTTON (#16) to confirm and complete the alarm time
setting.
Setting the “wake to” alarm source:
1. In Standby or radio mode, tap the ALARM 1 BUTTON (#17). The ALARM 1 time
will show on the display and the current ALARM 1 status indicator will light on the
left side of the display. If no indicator is lit in means ALARM 1 of currently set to
OFF.
2. Repeatedly tap the ALARM 1 BUTTON (#17) to select the alarm source.
Wake to Alarm – ALARM 1 INDICATOR (ALARM) (#1) lights.
Wake to Radio – ALARM 1 INDICATOR (RADIO) (#2) lights.
Wake to Vibrator - ALARM 1 INDICATOR (VIBRATOR) (#3) lights.
Slide the HI/MED/LO SELECTOR (#27) on the vibrator to adjust
the vibration speed of the under pillow vibrator.
Alarm OFF – All ALARM 1 indicators on the left side of the display are OFF.
3.
The Alarm will sound for 60 minutes at the time you entered. The vibrator will
vibrate 3 minutes for power saving.
4. Setting ALARM 2 will follow the same steps as ALARM 1 above, but you will be
using the ALARM 2 BUTTON (#18) and the ALARM 2 indicators will be on the right
side of the display.
Turning OFF the alarm
•
When the alarm sounds, the corresponding alarm indicator will flash.
•
Press any button except for the SNOOZE BUTTON (#15) to turn off the alarm
sound or under pillow vibrator.
Notes:
•
For setting a one-day alarm, just set the desired alarm time one day before.
•
The alarm will activate at the time set the day prior. After having switched off the
alarm sound, tap the corresponding alarm button to disable the alarm (the alarm
indicator will off).
•
To set another one-day alarm, just repeat the above steps.
