E-14
TIME PROJECTION
1. Press the PROJECTOR ON/OFF BUTTON (#1) to turn “On” or
“Off” the projector.
2. Project the time onto a light/flat surface such as the ceiling or
wall behind the JCR-238.
3. The projector portion of the JCR-238 can be repositioned (up to
180° forward to back) to adjust the projection angle.
4. If necessary, you can tap the 180° FLIP BUTTON (#1) to invert
the projected time 180º.
Notes : The optimal projection distance is 3-9 feet.
The PM INDICATOR (#16) does not show in the projected
time.
USB BATTERY CHARGING
CONNECTING A USB CORD (NOT INCLUDED) FOR CHARGING
YOUR CELL PHONE (DC 5V 1000MA)
1. Plug the standard end of the USB cable (not included) into the
USB CHARGING PORT located on the back of the JCR-238.
Plug the other end of the cable into the device you wish to
charge.
2. Observe the battery charge indicator on your device to make
sure the charging process starts normally.
3. Unplug the cable when your device is fully charged.
WARNING!
• The USB port located on the back of the JCR-238 is designed
for a smart phone or portable device battery charging only and
does not support data transfer or connection to a computer.
• Don’t connect the USB port of the JCR-238 to other USB
charger. It may damage both units and void the warranty.
