background image

E-9

1.  Connect the cord of the power adaptor to the DC IN JACK (#18) 

 

of the JCR-238.

2.  Connect the plug of the power adaptor to a wall socket. 

 

The radio is powered and in standby mode when you see the 

 

display is switched on. 

Battery Back-up system

•  The radio is equipped with a battery back-up system. It requires 

 

a 3V lithium battery CR2032 (not included). Insert the battery 

 

into the battery compartment (#19) and make sure the positive 

 

and negative (+ or -) sides of the battery are in contact with the 

 

corresponding terminals in the BATTERY COMPARTMENT 

 

(#19). 

•  If a power cut occurs, the radio automatically switches to the 

 

battery power supply and keeps the clock and timer settings. 

•  To open the BATTERY COMPARTMENT (#19), use a 

 

screwdriver to detach the screw on the compartment door.

•  When replacing the battery, do not disconnect the power 

 

adaptor. Otherwise, all clock and alarm settings will be lost.

        WARNING

DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

This product contains a coin/button cell battery.  If the coin/button 

cell battery is swallowed, it can cause severe internal burns in just 2 

hours and can lead to death.

Keep new and used batteries away from children.  If the battery 

compartment does not close securely, stop using the product and 

keep it away from children.

If you think batteries might have been swallowed or placed inside 

any part of the body, seek immediate medical attention.

Содержание JCR-238



















Отзывы: