E-15
PRESET EQ (REMOTE CONTROL ONLY)
This unit provides 4 different EQ modes to enhance your listening experience. You can select the
desired effect by pressing the
EQ Button
on remote control repeatedly at following sequence:
ROCK
POPS
JAZZ
CLASSIC
OFF
MUTE BUTTON (REMOTE CONTROL ONLY)
Press the
MUTE Button
on remote control to mute the sound output from the speaker
temporarily. The “MUTE” icon will appear in display.
Press the
MUTE Button
again or
VOLUME CONTROL
on remote control to resume to normal
speaker playback.
SLEEP OPERATIONS (REMOTE CONTROL ONLY)
The sleep timer allows you to turn the unit off after a designated time is reached.
1. To activate the sleep timer, turn the unit on and tap the
MODE button
to select FM radio, CD,
Bluetooth or listening to music via AUX IN.
2. Tap the
SLEEP button
on remote control, the sleep time icon
“
SLEEP
” appears on the display.
3. Repeatedly tap the
SLEEP button
to select a sleep time. The unit will turn off after 10, 20, 30,
40, 50, 60, 70, 80 or 90 minutes. Wait for 3 seconds after your selection for the unit to confirm
the selection, the unit will play for the selected length of time then automatically turn off.
4. To cancel the sleep timer, tap the
SLEEP button
repeatedly until timer shows “OFF”, the sleep
time icon
“
SLEEP
” disappears on the display
5. To turn the unit off before the selected length of time, press the
button
at any time.
Notes:
1.) To check the remaining sleep time, tap the
SLEEP button
once.
2.) If you are falling asleep to music from an external device connected to the AUX input, the
sleep timer will shut off the power to this system but it will not turn off the external device.
USING HEADPHONES (NOT INCLUDED)
Inserting the plug of your headphones into the Stereo Headphone Jack will enable you to listen to the CD or
Radio music in private. When using headphones, the Built-in Speakers will be disconnected.
READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES
1. Avoid extended play at very high volume as it may impair your hearing.
2. If you experience ringing in your ears, reduce the volume or shut off your unit.
3. Keep the volume at a reasonable level even if your headset is an open-air type designed to
allow you to hear outside sounds. Please note that excessively high volume may still block
outside sounds.
ADJUST DISPLAY BRIGHTNESS (REMOTE CONTROL ONLY)
1. In Power on mode, press the
DIMMER Button
on the remote control to adjust the display
brightness. The brightness of the front panel display will change in the order shown below.
BRIGHT
DIM
MEDIUM
2. In Standby mode, press the
DIMMER Button
on the remote control to adjust the display
brightness. The brightness of the front panel display will change in the order shown below.
DIM
MEDIUM
BRIGHT