3
®
CD511K
Beep
1. Press and hold the
SEL button for more
than two seconds.
Current Beep setting
appears in the
display.
2. Use the volume ring
to make changes to
the Beep setting.
Display
Program
BEEP OFF
beep sound off
BEEP 2ND
beep sound enabled
when second function
key is pressed
BEEP ON
beep sound on
Initial Volume
1. Press and hold the
SEL button for
more than two
seconds.
2. Press SEL button
one time. INVOL
appears in the
display.
3. Use the volume ring
to set the initial
volume limit.
Display
Program
INVOL 0
minimum
INVOL 45
maximum
Program Sequence
Beep off > Beep 2nd > Beep on
SEL
2
1
SEL
SEL
3
2
1
SEL
SEL
>2 Sec
>2 Sec
Use INVOL to set the loudest volume at
which the unit will turn on.
Note:
The unit will turn on at the INVOL limit unless
the volume level was adjusted below the
INVOL limit during last operation, then the
unit will turn on at the lower level.
For example: If the INVOL is set to 20 and
the volume level was adjusted to 15 during
last operation, the unit will turn on at 15. If the
INVOL is set to 20 and the volume level was
adjusted to 35 during last operation, the unit
will turn on at the INVOL setting of 20.
5598 CD511K_Eop.p65
3/23/00, 2:15 PM
3
