4
®
CD510K
Disconnect Battery
Before you begin, always
disconnect the battery
negative terminal.
+
–
Remove Old Radio
Your original car radio is installed in one of four ways, depending on the car.
MUTE B
BE LD
LOC
AM
PM
SEEK
A•PS
OP
EN
EJ
SEEK
A•PS
OPEN
EJ
1
Bend
Tabs
Flat
2
Pull Sleeve Out
Caution: Edges are
sharp. Use a rag
or wear a glove.
MUTE B
BE LD
LOC
AM
PM
CH
SEEK
A•PS
OP
EN
EJ
1
3
2
Standard Bracket Mount
(GM, Dodge,
Jeep)
1. Remove dashboard faceplate
2. Unscrew brackets
3. Disconnect wiring harness and remove radio
Front Load Mount
Some cars use a special removal tool
to release the radio (Ford and Mercury).
1. Insert the tool(s)
2. Pull out the radio
3. Disconnect wiring harness and
remove radio
Replacing an Aftermarket Radio
Use a screwdriver to bend tabs completely out
of the way. Pull sleeve from dashboard. The
sleeve should fit tightly and may be damaged
unless you remove it carefully.
Import Type Mount/With Factory Radio
1. Remove trim to expose DIN chassis.
2. Remove screws that secure radio to the
dashboard.
3. Remove brackets from the side of radio.
4. Disconnect wiring harness and remove radio.
