background image

How to Install the CD510K AM/FM
Stereo Receiver/CD Player with Optional
CD Changer Control and Detachable
Flip-Over Security Panel

®

Installation

.............................

2

Before You Begin Installation ..... 2

Tools and Supplies Needed ....... 2

Speaker Requirements .............. 2

Prepare Radio for
Installation .................................. 2

Adapters for Easier
Installation .................................. 2

• Connections ........................ 3

• Crimp Connections ............. 3

• Upgrading your System ...... 3

Disconnect Battery ..................... 4

Remove Old Radio .................... 4

Wiring

.......................................

5

• Fuse Adapters .................... 5

• Cars with a Single

Speaker Wire ...................... 5

Wiring with a Wiring Adapter ..... 6

Connect Wires ........................... 6

Wiring Color Codes .................... 6

Install Wiring Inside the Car ....... 6

Wiring Diagram–Advanced
Installation .................................. 7

Testing

....................................

8

Reconnect Battery ..................... 8

Test Power Wiring ...................... 8

View/Set the Clock ..................... 8

Test Antenna Connection ........... 9

Test Memory Wiring ................... 9

Test Speaker Connections ....... 10

Final Installation ....................... 11

Troubleshooting

................

12

Reset Button/
Remove Radio from Dash ....... 12

Detachable Flip-Over Panel .... 12

Warranty

..............................

13

Contents

 Technical Assistance

For technical assistance with the installation of the
CD510K, call 1-800-323-0221.

Installation

Welcome!

What you're holding in your hands is no ordinary owner's
manual. We've tried to make the instructions in this book
clear and easy to follow.

For your Jensen stereo to work right, it must be installed
correctly. This manual will show you how to install your new
stereo like a pro. It's a good idea to read all of these
instructions before you begin the installation. Most
installations are straightforward and can be handled by a
do-it-yourselfer with the right tools, patience, and the ability
to follow instructions. But, do-it-yourself installation isn't for
everyone. If you still don't feel confident after reading this
book, consider turning the installation job over to someone
better suited to it.

Warranty Service

If your Jensen stereo should ever require service, you will
need to have the original dated receipt. If you ever need to
return the unit for any reason, always include the receipt
with the product.

3

1

2

®

COMPA

CT

DIGITAL

 AUDIO

®

PWR

BND

AS/PS

LOUD

SHIFT

S.WFR

CH

MONO

LOC LOUD

CDC

0

+

+

S.W

MEM

CLR

6

7

8

9

10

INT

1

RPT

2

3

RDM

4

PGM

CLK

DISP

5

REL

M

OD

E

SE

L

Install brackets
(page 4)

Install wiring
(pages 6 and 7)

Final
installation
(page 11)

Содержание CD510K














Отзывы: