- 11 -
How to setup AirLink 3G (page 2 of 2)
5. Click Advanced Settings -> WAN -> 3G/4G
6. Enter the
PIN code
for the SIM card.
If the PIN code are deactivted/disabled you can leave this empty.
7. Enter the
APN
for your prodvider (Please see next page to find the correct APN)
Important! Do NOT enter any information in the Username and Password area.
8. Click
Apply
and then
Apply
one more time and wait for the router to reboot (about 60 seconds)
9. Click Status -> Modem info to see if AirLink 3G have detected the modem.
It can take up to one minute before the modem is shown, so please try click
Modem info
several times
to update the screen.
10. Click Status -> Internet connection
This will show you the connection status for the USB modem (3G/4G)
Normaly it will take about 1-2 minutes before the modem is connected to the internet.
11. When the status is saying Connected then your AirLink 3G is connected to internet and ready for use.
6
7
8
This screen shows you information about
the type of USB modem connected, IMEI
and the signal strength.
1-2 min.
