6
How to setup and use AL2200AC in AP mode
In AP (Access Point) mode the AL2200AC will work as a wireless
transmitter. In AP mode you MUST connect the AL2200AC to
your wireless router using a network cable.
In AP mode the AL2200AC will transmitt a wireless network on
both 2.4GHz and 5GHz frequency.
In AP mode AL2200AC is already setup with an unique network
name and password.
The network name for both 2.4Ghz and 5GHz can be seen on the
product label.
1. Please set the switch to AP position.
2. Place the AL2200AC in an availble power outlet and connect it to the existing network
(router or wireless router) using the enclosed network cable.
3. To connect to the AL2200AC wireless network do a search for available wireless networks.
On the product label you will find the network name (AirLinkxxxxx) of the AL2200AC.
Select the correct wireless network and connect to it.
4. Enter the password for the AL2200AC wireless network and click Connectt/OK.
The password (8 characters) can be found on the product label.
If the AL2200AC is connected to a working internet connection you should get access to
internet.
IMPORTANT!
In order for the AL2200AC to work in AP mode it is important that it is connected to a modem/router
with the router function enabled.
If you don’t get access to internet through AL2200AC in AP mode the problem is most likely that
the router/modem does not have an active router function.
2
2
1
Internet
3
4
5VDC
ON / OFF Reset/WPS
WiFi
3
AP
Repeater
Client
AP
Repeater
Client
1
