![background image](http://html1.mh-extra.com/html/jensen/airlink-2200/airlink-2200_faq_3786415010.webp)
10
Setup AL2200AC using WPS in repeater mode
WPS is a standard for easy and secure setup and connection without the need of enter any
encryption key.
A WPS connection is done by pushing a button on both devices, or enter a pin code.
Please make sure that the WPS function in your wireless router is enabled.
See manual for wireless router for how to use WPS.
1. Click the WPS button on the wireless router (usually for 2-3 seconds).
2. Click the WPS button on the AL2200AC for 2 seconds.
3. The WPS LED will flash slowly when WPS is ebabled.
4. The WPS LED will start flashing fast when there is an successfull WPS connection.
5. Please wait 1 minute for the AL2200AC to reboot and reconnect.
6. Now do a search for wireless networks on your device (computer, tablet etc.).
The extended network from AL2200AC will have the same name as existing network with added
_2.4Gre
and/or
_5Gre
at the end of the name (depending on which network choosen).
i
2
1
Internet
3
4
5VDC
ON / OFF Reset/WPS
WiFi
2
1
Internet
3
4
5VDC
ON / OFF Reset/WPS
WiFi
AirLink00868
AirLink00868_2.4Gre
2
1
AirLink00868