8
Electronic Oven Controls
Control Display
The display will flash when powered up or after a power loss.
Press CANCEL UPPER to clear. When the oven is not in use, the
time of day is displayed. If the range is in Energy Save mode, the
display will be blank when not in use.
Tones
Tones are audible signals, indicating the following:
One Tone
■
Valid keypad press
■
Oven is preheated (long tone).
■
Function has been entered.
■
Reminder, repeating each minute after the end-of-cycle tones
Three Tones
Invalid keypad press
Four Tones
■
End of cycle
Use the Options/Clock keypad to change the tone settings.
Energy Save
The Energy Save mode puts the range into Sleep mode and
reduces energy consumption.
To Activate the Energy Save Mode:
1.
Press and hold OPTIONS/CLOCK for 3 seconds. “Energy
saver on.” will appear in the display.
2.
The setting will be activated after 5 minutes.
To Deactivate the Energy Save Mode:
1.
Press and hold OPTIONS/CLOCK for 3 seconds. “Energy
saver off.” will appear in the display.
2.
The clock will reappear in the display and the range can be
operated as usual.
Settings
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Options/Clock
keypad.
Use the Options/Clock keypad to scroll through the features that
can be changed. Each press of the Options/Clock keypad will
advance the display to the next setting. After selecting the feature
to be changed, the control will prompt you for the required input.
Then press START or CANCEL UPPER to exit and display the time
of day. Details of all of the feature changes are explained in the
following sections.
Press CANCEL UPPER to exit Settings.
Clock
The Clock can use a 12- or 24-hour cycle.
1.
Press OPTIONS/CLOCK until “CLOCK” is displayed.
2.
Press START to change the time.
3.
Press “3” for AM or “6” for PM.
4.
Use the number keypads to set the time of day.
5.
Press START or CANCEL UPPER to exit and display the
time of day.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit but can be changed
to Celsius.
1.
Press OPTIONS/CLOCK until “TEMP UNIT” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press START or CANCEL UPPER to exit and display the
time of day.
Audible Tones Disable
Turns off all tones, including the end-of-cycle tone and keypress
tones. Reminder tones are still active when all tones are disabled.
1.
Press OPTIONS/CLOCK until “SOUND” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press START or CANCEL UPPER to exit and display the
time of day.
Sound Volume
Sets the volume of the tone to either high or low.
1.
Press OPTIONS/CLOCK until “SOUND VOLUME” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press START or CANCEL UPPER to exit and display the
time of day.
End-of-Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1.
Press OPTIONS/CLOCK until “END TONE” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press START or CANCEL UPPER to exit and display the
time of day.
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
1.
Press OPTIONS/CLOCK until “KEYPRESS TONE” is
displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press START or CANCEL UPPER to exit and display the
time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end-of-cycle tones.
1.
Press OPTIONS/CLOCK until “REMINDER TONE” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press START or CANCEL UPPER to exit and display the
time of day.
12/24 Hour Clock
1.
Press OPTIONS/CLOCK until “12/24 HOUR” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press START or CANCEL UPPER to exit and display the
time of day.
Demo Mode
IMPORTANT:
This feature is intended for use on the sales floor
with 120 V power connection and permits the control features
to be demonstrated without the oven turning on. If this feature is
activated, the oven will not work.
1.
Press OPTIONS/CLOCK until “DEMO MODE” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press START or CANCEL UPPER to exit and display the
time of day.
