18
Activating and canceling the clock/day
of week display:
1. Press
Setup
pad.
2. Select
CLOCK
.
3. Press the arrow to scroll until DISABLE is displayed.
4. Select
DISABLE
.
5. Select
OFF
to turn the clock display off
, or select
ON
to turn
the clock display on
.
6. Select
OFF
to turn the day of the week display off
. Select
ON
to turn the weekday display on
.
7. To exit the Setup mode, press
Setup
pad.
Entering the day of the week:
1. Press
Setup
pad.
2. Select
CLOCK
.
3. Press the arrow to scroll until DAY
is displayed.
4. Use Quickset arrow to scroll through the days.
5. To exit the Setup mode, press
Setup
pad.
To set the clock for a 12 or 24 hour format:
The clock can be set to display time in either a 12 hour or 24
hour format.
1. Press the
Setup
pad.
2. Select
CLOCK
.
3. Use the arrow to scroll to the next screen.
4. Select
12/24 HOUR
.
5. Select
12 HR
or
24 HR
.
6. To exit Setup mode, press
Setup
pad.
Timers
Setting the Timers (Timer 1 or Timer 2):
1. Press
TIMER 1
or
TIMER 2
pad.
2. Press one of the displayed times using the
Quickset pads, or press the number pads to
enter the desired time.
Important:
Each press of the displayed time choices adds
additional time. For example, pressing “10 MIN”
three
times provides 30 minutes on the timer (0:30).
3. Press
Enter
pad.
Changing the amount of time entered once the
Timer starts:
1. Press the
TIMER 1
or
TIMER 2
pad
once
.
2. Press the displayed times on the Quickset
pads until the desired time is entered.
OR
3. Press the number pads to enter the new desired time.
4. Press
Enter
pad.
Canceling the Timer:
Press the
TIMER 1
or
TIMER 2
pad
twice
.
If both Timers are active:
If the desired Timer is already in the foreground, press
once
for edit mode and
twice
to cancel the Timer. If the desired
Timer is not in the foreground, follow the steps below.
1. Press the desired
TIMER
pad
once
. The selected Timer will
come to the foreground.
2. Press the
TIMER
pad a
second
time to access the edit
mode in order to make changes.
3. Pressing the
TIMER
pad a
third
time will cancel the Timer.
Changing the Timer beeps:
The signal beeps for TIMER 1 and TIMER 2 can be changed.
The options available are two beeps every thirty seconds, two
beeps every sixty seconds or one beep only. The default
setting is one beep.
1. Press the
Setup
pad.
2. Select the arrow to scroll until TONES
is displayed.
3. Select
TONES
.
4. Select
TIMERS TONES
.
5. Select the desired timer beep format (2-30 SEC, 2-60 SEC
or 1 BEEP).
6. Press
Setup
pad to exit Setup mode.
Locking the Control and Oven Door
The oven control and oven door can be locked to prevent
accidental programming. If an oven function is currently
being used, the control and door cannot be locked.
To lock the control and door:
Press the
Back
and
Enter
pads at the same time, holding for
three seconds or until CONTROL LOCKED appears in the
display.
To unlock the control and door:
Press the
Back
and
Enter
pads at the same time, holding for
three seconds. UNLOCKING DOOR will appear in the display
when the control and door are unlocking.
8113P630-60
5/3/06, 8:59 AM
19
