12
the selection you made, you press the [
]
ENTER
key to save
the changes and move to the next option.
4. If you don’t need to change the current blinking option just press
the [
]
ENTER
key to move to the next option.
5. You can press and hold
[MODE/-]
key for two seconds and it will
move back the cursor to the previous option.
a.
PASSWORD CHECK
page
You will
only
see this page if the unit is password locked. To
change any settings or calibration you need to unlock the system to
remove the “
PASSWORD LOCKED
” message. You need to enter
the correct four digit number
on the “
ENTER
PASSWORD
” input. You
can still view all the pages of
the
Calibration/Setting
mode
if the system is
password locked by just
pressing the
[CAL/VIEW]
key on this page. If the unit
is “
PASSWORD LOCKED
”
going to
Calibration/Setting
mode
will not affect the function of the relays and analog output.
CAUTION: If the unit is not locked then every time the user
enters the Calibration/Setting mode the relays and analog out
will be frozen.