Jema Autolifte A/S Industrihegnet 2 4030 Tune Denmark Tel. (+45) 48180300
www.jemaautolifte.dk
1 GENERAL
Tyre changer / removal machine DWB-8-E is designed for fitting / removal of tube and tubeless tyres
on wheels of cars and vans. It may also be used for light - alloy wheels as its working parts do not
distort the delicate structure of such wheels.
DWB-8-E
is capable of performing the following functions:
Basic version:
-
separation of tyre from wheel rim
-
tyre removal and fitting
-
inflation by means of an air - gun with pressure gauge
Extended version - additionally:
-
surge inflation of tubeless tyres
1. Set up machine on a hard, flat base
2. Connect supply cable to 3x380V/50Hz socket.
NOTE:
The machine is provided with a four - core supply cable. Green - yellow wire, connected to
machine housing is a protective wire. Other three wires are phase wires.
TECHNICAL DATA:
- tyre diameter range
- max tyre width
- wheel clamping on machine
- column deflection
- supply air working
- power supply
- power input
- motor rating
- separator pressure on tyre
- required floor space
- machine height
- machine weight
to 23 inches
12 inches
pneumatic
pneumatic
from 0,8 to 1,0 MPa
3 x 380V / 50Hz (+10%, -15%)
0,8 kVA
0,75 kW
1,5 tonnes (at 1 MPa)
800 x 900 mm
1450 mm
ok. 200 kg
2. INSTALLATION
3
