JEM AF-2, Руководство по обслуживанию

Страница: 4 / 27

4
CE mark
All products that are produced by JEM / Martin carry the CE Certification .
These products meet the requirements of the following EC Standards and as such, comply with the EMC
(Electromagnetic Compatibility) and LVD (Low Voltage Directives) , directives of the European Community :
EN 50 081-1 1992 Generic Emission Standard for domestic and light Industrial environments.
EN 50 082-1 1992 Generic Immunity Standard for domestic and light Industrial environments.
EN 60 335-1 1995 Safety of household and similar electrical appliances
These standards reference the following European standards:
Emissions:
EN 55 022 /B RF voltage and field strength
EN 60 555 Harmonic current content
EN 55 014 RF voltage (discontinuous)
Immunity:
IEC 801-2 Electrostatic discharge to case
IEC 801-4 Common mode fast transients
These standards also meet the requirements of
CISPR 22 .
JEM did not carry the
CE mark on products that were produced prior to 1995.
These products can be identified by either the DIN/XLR socket on the rear or top of the unit or the Mains PCB :
If the unit has a 5 pin DIN or a 4 pin XLR without the CE text on the rear, the unit is classed as NON-CE .
If the PCB has a 12 pin Molex connector fitted to it, this is classed as a NON-CE unit.