JEM AF-2, Руководство по обслуживанию

Страница: 13 / 27

13
How To Change A PCB:
REFER TO SCHEMATICS / DIAGRAMS IN THE APPENDIX FOR MORE DETAILS
Main PCB
1. DISCONNECT FROM MAINS SUPPLY.
2. Move to a flat position and remove BOTTOM COVER .
3. Remove the 2 screws that hold the PCB to the chassis.
4. Disconnect the MAIN PCB WIRING LOOMS from the MAIN PCB (Note orientation before
removal).
5. The MAIN PCB is mounted on 2 mounting posts which need to be squeezed to remove the
PCB.
6. Remove the PCB.
Refitting
:
7. Mount the PCB on the mounting posts
8. Replace the 2 screws that hold the PCB to the CHASSIS.
9. Reconnect the MAIN PCB WIRING LOOMS (Observe polarity).
10. Check the operation of the unit.
11. Refit the
TOP COVER .