14
JREMO 10K
Industrial radio remote controller
CHAPTER 4. MAINTENANCE
4-1 STANDARD OPERATION
A. Twist up the EMS button of Tx and do as START ON function procedure
preset and find the Rx Main Lamp ON. During normal operation see if the
Tx led shows Green light which is normal, and if the battery power of Tx
goes weak then the Tx led light will turn to red and green color. In this
case stop the operation before any abnormal functions such as delay
responses, intermitting runs, no stops, etc during working with red and
green led signalling.
B. Push the EMS button when every normal operation finished and/or
in any emergency situation may occur do the same immediately, and
position the Rotary S/W to OFF after the EMS button pushed down.
C. In case not in use for a long-term operation, take off all the batteries
from tx for avoid of any contamination and/or unnecessary consumption
of battery power.
CHAPTER 4. MAINTENANCE
4-2 FUSES
A. A replaceable fuse is put inside the fuse column.
B. For replacement of fuse, use a flathead screwdriver or by hand to push
down head of the fuse cap by rotating 90°anticlockwise to open the cap.
C. Replace with a new fuse and close the cap in opposite procedure.
