WWW.JEIUK.COM
RAILBEAST RDP-36
This document is protected by copyrights.
Copying, using, or distributing without permission of Ansa Group Ltd is prohibited.
16
3.7. Clamping the machine onto the rail and unclamping
Place the machine onto the rail (
1
) so that the locating pin comes into the first groove
of the hole center positioner (
2
) and the pressing screw comes into the resisting
socket (
3
). Then, tighten the screw (
4
) to clamp the machine onto the rail.
To unclamp the machine, loosen the pressing screw.
1
4
2
3
