manualshive.com logo in svg

JEI DRILLING & CUTTING SOLUTIONS RAILBEAST RDE-36, Руководство оператора

Поделиться
Скачать
JEI DRILLING & CUTTING SOLUTIONS RAILBEAST RDE-36 Скачать руководство пользователя страница 6

WWW.JEIUK.COM

 

RAILBEAST ELECTRIC RDE-36 

This document is protected by copyrights. 

Copying, using, or distributing without permission of Ansa Group Ltd is prohibited. 

6 

2. SAFETY PRECAUTIONS 

1. Before  use  read  this 

Operator’s,  Manual and complete a training in  occupational 

safety and health. 

2. 

Use only in applications specified in this Operator’s Manual. 

3. Make sure that the machine has all parts and they are genuine and not damaged. 

4. Make  sure  that  the  specifications  of  the  power  source  are  the  same  as  those 

specified on the rating plate. 

5. Do  not  carry  the  machine  by  the  power  cord  and  do  not  pull  the  cord.  This  can 

cause damage and electric shock. 

6. Transport and position the machine by using the carrying handle. 

7. Keep untrained bystanders away from the machine. 

8. Before  each  use,  make  sure  the  correct  condition  of  the  machine,  power  source, 

power cord, plug, control panel, and tools. 

9. Before each use, make sure that no part is cracked or loose. Make sure to main-

tain correct conditions that can have an effect on the operation of the machine. 

10.  Before starting, make sure that the rail profile templates installed agree with the 

rail standard. 

11.  Use the correct coolant for the ambient temperature. 

12.  Keep the machine dry. Do not expose the machine to rain, snow, or frost. 

13.  Keep the work area well lit, clean, and free of obstacles. 

14.  Make  sure  that  the  tool  is  correctly  attached.  Remove  wrenches  from  the  work 

area before you connect the machine to the power source. 

15.  Do not use tools that are dull or damaged. 

16.  Unplug the power cord before you install and remove tools. Use protective gloves 

to install and remove tools. 

17.  Do  not  make  holes  whose  diameter  or  depth  differ  from  those  specified  in  the 

technical data. 

18.  Do not use near flammable materials or in explosive environments. 

19.  Use eye and ear protection and protective clothing. Do not use loose clothing. 

20.  Do not touch chips or moving parts. Do not let anything catch in moving parts. 

21.  After each use, remove chips and coolant from the machine and the tool. Do not 

remove chips with bare hands. 

22.  Unplug the power cord before you do maintenance or install/remove parts. 

Содержание RAILBEAST RDE-36






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды