WWW.JEIUK.COM
RAILBEAST ELECTRIC RDE-36
This document is protected by copyrights.
Copying, using, or distributing without permission of Ansa Group Ltd is prohibited.
11
3.4. Clamping the machine onto the rail and unclamping
Put the machine onto the rail (
1
). Make sure that the locating pin is in the first groove
of the hole center positioner (
2
) and the pressing screw is in the resisting socket (
3
).
Then, tighten the screw (
4
) to clamp the machine onto the rail.
To unclamp the machine, loosen the pressing screw.
1
4
2
3
