WWW.JEIUK.COM
RAILBEAST ELECTRIC RDE-36
This document is protected by copyrights.
Copying, using, or distributing without permission of Ansa Group Ltd is prohibited.
10
3.3. Installing and removing the hole center positioner
Select a hole center positioner (not included) that agrees with the rail standard, and
loosen the levers (
1
). Put the positioner onto the rail (
2
) so that the positioner face
aligns with the rail face (
3
). Lock the levers in this position. Next, use the 6 mm hex
wrench to tighten the screws (
4
) so that the positioner clamps onto the rail (
5
).
To remove the positioner, loosen the screws (
4
)
and levers (
1
).
2
4
5
1
Clamped
Unclamped
3
