background image

1

Assembly instruction

Carthago motorhomes

»Chic c-line« 

»Chic e-line«

Jehnert Sound Design    I    Im Michelreis 14    I    72124 Pliezhausen    I    Tel.: 07127-93457-0    I    [email protected]    I    www.jehnert.de

Art. No.  69501-62/ 69501-82, FS: 69830 

Stand: 18.10.2021

1.20.  Remove the monitor and the panel on the right above the  

          door (do not disconnect the cable!). 

Speaker cable

from  

          the wall cabinet via the door to the installation location of  
          the living area box. To feed the cable through, drill a hole  
          in the wooden strip above the box. 

1.21. For the living area box on the driver‘s side, use the 

          factory installed loudspeaker cable is used:
          Remove factory left speaker, extend cable 
          and lead it through the existing opening to the 
          to the installation location of the living area box.

drilling

1.16. Remove the storage compartment in the dashboard on    
         the passenger side. (loosen 4 screws). 

1.17. 

Speaker cable 

(1,5mm

2

) under the dashboard

lead from the radio to the mid-high modules. 

Driver‘s side: same as amplifi er cable - lead over steering 

column.
Passenger side: lead under the storage compartment

1.19.  

Speaker cable

 (1,5mm

2

) starting from the radio, 

          behind the window trim (see Fig.) into the living room.

          room up to the cabinet, see Fig. 1.20.

1.18. Remove 2 screws from the storage compartment/trim    
         panel on the passenger Remove the screws on the 
         storage compartment/trim on the passenger side and lift  
         the trim upwards.

Содержание 69501-62









Отзывы: