background image

1

Assembly instruction

Carthago motorhomes

»Chic c-line« 

»Chic e-line«

Jehnert Sound Design    I    Im Michelreis 14    I    72124 Pliezhausen    I    Tel.: 07127-93457-0    I    [email protected]    I    www.jehnert.de

Art. No.  69501-62/ 69501-82, FS: 69830 

Stand: 18.10.2021

1.14.  

Subwoofer cable

 through the opening next to the 

          ventilation pipe (like amplifi er cable) to the amplifi er 

          and insert plug in the „Plug & Play“ connector.

          Tip:

 Tie cable together with cable tie

1.13.  

Subwoofer cable

 from the mounting location (in the  

          storage compartment under the seat group, next to belt   

          support, see Fig. p.5 Step 2) behind the fairing and above 

          the storage compartment opening to the amplifi er, cable 

          routing see Fig. 1.9.

      

    Tip:

 Lay cable duct above the stowage compartment 

Subwoofer 17000

Subwoofer Carthago-spezifi c 17009

Subwoofer - optional, depending on the space available:

1.15.  Plug in the subwoofer cable »Plug & Play«.
          Mount the 4 Velcro pads on the bottom of the subwoofer (4x screws 3.5x13). Place the Velcro pads onto the Velcro plates 

          and remove the adhesive strips. Make the vehicle fl oor free of dust and grease in the area of the Velcro pads. 

          and press fi rmly into place. Fasten the subwoofer additionally with a bracket.

Velcro

angle

Содержание 69501-62









Отзывы: