Jegs 86004, Руководство пользователя

Страница: 17 / 21

Used oil should be disposed of at an
approved disposal site. See your local oil
retailer for more information.
Operation Cont.
16
Oil Recommendations (Figure 14)
• Do not use special additives.
• Outdoor temperatures determine the proper oil
viscosity for the engine. Use the chart to select
the best viscosity for the outdoor temperature
range expected.
Air Filter (Figure 15)
A dirty air filter will reduce the life span of the engine,
make it difficult to start the engine, and reduce the
unit’s performance.
• To clean, remove the air filter cover.
• Carefully pull the air filter out by lifting up along
the edges.
• Remove dirt from filter by tapping on it or having
it blown out. Replace with new filter annually.
• Reinstall air filter so that it seals and replace air
filter cover.
Checking Spark Plugs (Figure 16)
• Disconnect the plug wire from the spark plug.
• Before removing the spark plug, clean the area
around its base to prevent debris from entering
the engine.
• Clean carbon deposits off the electrode with a
wire brush.
• Check the electrode gap and slowly adjust to
0.762 mm - 0.80 mm (.030 - .031”) if necessary.
• Reinstall spark plug and tighten to Torque 22.0
– 26.9 Nm (16-20 ft-lbs).
• Reconnect spark plug wire.
• If the spark plug is worn replace it only with an
equivalent replacement part.
• Spark plug should be replaced annually.
• Torch F6TC
• NGK BP6ES
• Champion N9YC
• Or Equivalent
Figure 15
Spark Plug Gap
• 0.030-0.031 in.
• 0.762-0.80 mm
Spark Plug Torque
• 16-20 ft-lbs
• 22.0-26.9 Nm
Figure 16