manualshive.com logo in svg

Jegs 81374, Руководство по установке

Поделиться
Скачать
Jegs 81374 Скачать руководство пользователя страница 6

 

 

Grounding

 

 

 

 

 

 

TO PREVENT ELECTRIC SHOCK AND DEATH FROM 
INCORRECT GROUNDING WIRE CONNECTION: 
Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. 
Do not modify the power cord plug provided with the tool. Never remove the grounding prong from 

the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service 
facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. 
 

Grounded Tools: Tools with Three Prong Plugs 

3-Prong Plug and Outlet 

                          

1. Tools marked with “Grounding Required” have a three wire cord and three prong 

grounding plug. The plug must be connected to a properly grounded outlet. If the tool 
should electrically malfunction or break down, grounding provides a low resistance 
path to carry electricity away from the user, reducing the risk of electric shock. 

(See 3-    

Prong Plug and Outlet.)  

 

2. The grounding prong in the plug is connected through the green wire inside the cord to the 
grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s 

grounding syste

m and must never be attached to an electrically “live” terminal. 

(See 3-Prong Plug and Outlet.) 

 

3. The tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes 
and ordinances. The plug and outlet should look like those in the preceding illustration. 

(See 3-Prong Plug and 

Outlet.) 
 

Double Insulated Tools: Tools with Two Prong Plugs 

Outlets for 2-Prong Plug 

1. Tools marked “Double Insulated” do not require grounding. They have a special double 
insulation system which satisfies OSHA requirements and complies with the applicable 
standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the 
National Electrical Code. 
 
2. Double insulated tools may be used in either of the 120 volt outlets shown in the 
preceding illustration. 

(See Outlets for 2-Prong Plug.)

  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

6

 

                                         1-800-345-4545   jegs.com

 

Содержание 81374
















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды