Electrical Safety
1.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with grounded power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
2.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an
increased risk of electric shock if your body is grounded.
3.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
4.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
5.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable
for outdoor use reduces the risk of electric shock.
6.
If operating a power tool in a damp location is unavoidable, use a Ground Fault Circuit Interrupter (GFCI)
protected supply.
Use of a GFCI reduces the risk of electric shock.
Personal Safety
1.
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention
while operating power tools may result in serious personal injury.
2.
Use personal protective equipment. Always wear eye protection.
Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
3.
Prevent unintentional starting. Ensure the Switch is in the off-position before connecting to power source,
picking up or carrying the tool.
Carrying power tools with your finger on the Trigger or energizing power tools that
have the Trigger on invites accidents.
4.
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
5.
Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in
unexpected situations.
6.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts.
Loose clothes, jewelry or long hair can be caught in moving parts.
7.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection can reduce dust-related hazards.
8.
Only use safety equipment that has been approved by an appropriate standards agency.
Unapproved safety
equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection
must be NIOSH-approved for the specific hazards in the work area.
Power Tool Use and Care
1.
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the
job better and safer at the rate for which it was designed.
2.
Do not use the power tool if the Switch does not turn it on and off.
Any power tool that cannot be controlled with
the Trigger is dangerous and must be repaired.
3.
Disconnect the plug from the power source before making any adjustments, changing accessories, or
storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
3
1-800-345-4545 jegs.com
Содержание 81374
Страница 15: ...Assembly Diagram 15 1 800 345 4545 jegs com ...
