17. Check air hoses for wear, and keep them away from heat and sharp edges. Repair or replace damaged air hose
immediately. Do not carry tool by the air hose.
18. Air hose may cause tripping hazards; keep hose away from traffic areas.
19. Do not use this tool near flammable objects or in potentially explosive environments. Do not use near live electrical
wires.
20. Do not use power tools in damp or wet location, or expose them to rain. Keep work area well lit.
21. Do not leave a connected tool unattended. When not in use, disconnect tool from air source.
22. Shut off air supply and discharge any residual pressure from tool before removing hose, making adjustments,
changing accessories, or storing tool.
23. Make sure tool is switched off and your finger off the trigger, before connecting to air supply.
24. Remove adjusting keys and wrenches before turning on tool.
25. Keep visitors a safe distance from the work area. Keep children away.
26. Give your work undivided attention. Looking around, carrying on a conversation and
“horse-play” are careless acts
that can result in serious injury.
27. Do not force a tool or attachment to do a job for which it was not designed. The right tool will do the job better and
more safely.
28. Repetitive motions and/or exposure to constant vibration can be harmful to hands and arms. Take frequent breaks
and relax hands during extended operation. Change posture to avoid discomfort or fatigue.
29. Compressed air can be harmful if directed toward sensitive areas of the body, and may propel small particles
caught in the air stream. Exercise proper caution.
30. Use only recommended accessories; improper accessories may be hazardous.
31. Maintain tools with care. Keep air tool clean and oiled for best and safest performance.
32. Do not use combustible gases, carbon dioxide, oxygen or any bottled gas as an air source for the tool. These can
present risk of explosion and serious injury.
33. Do not lubricate the tool with combustible liquids, such as kerosene, diesel or jet fuel.
34. Do not dispose of this tool with normal household waste. Never dispose of the air tool into fire.
Specific Warnings for Metal Shear
35. This shear is designed for cutting sheet material, such as steel and plastics. If you are not familiar with the proper
and safe operation of a pneumatic shear, do not use until proper training and knowledge have been obtained.
36. Secure workpiece with clamps or vise. Keep both hands on tool to prevent loss of control.
37. Keep hands away from reciprocating blades.
38. Replace blades if they become damaged or dull.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in serious, or even fatal, injury.
This means that if precautions are not heeded, it may result in minor injury and/or possible tool
damage.
This manual is provided by JEGS, covering the safe operation and maintenance procedures for JEGS Air Shear. This
manual contains instructions on safety precautions, general operating procedures, maintenance procedures and parts
breakdown. Your tool has been designed and constructed to provide consistent, long-term operation if used in
accordance with the instructions set forth in this document.
The instructions and warnings in this manual may not encompass all possible workplace environments. The operator is
expected to take appropriate precautions and exercise common sense. As with any tool operation, safety of operator
and bystanders should be first priority.
If there are questions or comments, please contact JEGS.
Record the serial number and purchase information of your tool.
Retain this manual for future reference. If the tool transfers ownership, the manual should accompany it.
1-800-345-4545 jegs.com
