How connect device into the gun
1)
Red cable with max. cross section 1,5qmm lead to the positive pole of battery.
Add fuse between battery and device. (not included in package)
2)
Black cable with max. cross section 1,5qmm lead to the negative pole of battery
3)
Red cable with max. cross section 1,5qmm lead to the positive pole of motor
4)
Black cable with max. cross section 1,5qmm lead to the negative pole of motor
5)
Blue cable with max. cross section 0,25qmm lead to the one trigger connector
in mechbox (no matter where).
6)
Blue cable with max. cross section 0,25qmm lead to the one trigger connector
in mechbox (no matter where).
After connecting and testing the functionality of device drag heat shrink tube (in
package) over the device and shrink it by hot air gun.
1
First connection battery
1.
Connect battery - you will feel a short vibration, then a longer vibration in the grip
with motor. This means that the power-up self-test is complete and OK.
2.
Put the gun into SEMI and
fire the gun 5 times.
The Processor unit will now be
“trained” for your gun, battery and gear timing. You should do this every time you
power up the gun. Ignore this step for a gun with no SEMI capability such as M249.
3.
Put the gun into AUTO and push the trigger. Gun should fire single round too.
4.
If all went well, you are done! If not, read the
5 page
in manual.
