Jefferson JEFSWCFF14-110A, Руководство пользователя

Страница: 9 / 16

USER MANUAL
v.1.1
JEFSWCFF14-110A / JEFSWCFF14-230A
14" / 355mm
CUT OFF SAW
www.jeffersontools.com
9
MAINTENANCE
WARNING:
Ensure that the power supply is disconnected before carrying out any repair or maintenance on this equipment. Ensure that
all maintenance and repairs are carried out by qualified technicians using only Jefferson approved replacement parts (Please
refer to parts list and diagram supplied later in this manual.)
Check that all safety features and guards are operating correctly on a regular basis. Only use this machine if all guards/safety features are fully
operational. Check for misalignment or binding of moving parts, breakage of moving parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents are caused by poor tool maintenance. All motor bearings in this
machine are lubricated for life. No further lubrication is required.
Use a clean, slightly damp cloth to clean the plastic parts of the machine. Do not use solvents or similar products which could damage the plastic
parts.
WARNING:
Do not attempt to clean by inserting pointed objects through openings in the machine’s casings etc. The saw's air vents should
be cleaned using compressed dry air. Excessive sparking may indicate the presence of dirt in the motor or worn out carbon brushes. If this is
suspected have the machine serviced and the brushes replaced by a qualified technician with Jefferson recommended brushes.
Checking & Adjusting the Depth Stop
Transportation & Storage
For ease and convenience, when transporting or storing the machine, the cutting head can be held in the ‘down’ position using the Fold Locking
Knob.