Jefferson JEFSWCFF14-110A, Руководство пользователя

Страница: 6 / 16

USER MANUAL
v.1.1
JEFSWCFF14-110A / JEFSWCFF14-230A
14" / 355mm
CUT OFF SAW
www.jeffersontools.com
6
General Equipment Safety
This product is classed as a Hand Operated Cut Off Saw and must only be used in this capacity. It must not be modified in any way, or used to
power any other equipment or drive any other accessories other than those mentioned in this Instruction Manual.
WARNING: This machine is not safe for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning the safe use of the
machine by a person responsible for their safety and who is competent in its safe use. Any children in the working area should
be supervised to ensure that they do not have access to, and are not allowed to play with, this machine. Do not operate this
equipment under the influence of medication or alcohol.
Safety Warnings And Equipment Labels
It is important that you read all safety warnings and instructions supplied in this user manual and the equipment labelling. Failure to follow the
warnings and instructions may result in electric shock, fire and/ or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to mains-operated (corded) power tool or
battery-operated (cordless) power tools.
Safe Operation
Do not force the saw. Use the correct saw and blade for your application. Using the correct equipment will ensure safe cuts and will prolong the
life of the blade and the saw.
•
Carefully inspect the saw and the blade before each use. Do not operate the saw if any parts are missing. Do not operate the saw if any
damage is detected - contact Jefferson Tools, or your local dealer for any advice on repair.
•
Keep hands away from cutting area and the blade during operation. Keep your second hand on the auxiliary handle, or motor housing. If both
hands are holding the saw, they cannot be cut by the blade.
•
Do not reach underneath the workpiece. The guard cannot protect you from the blade below the workpiece.
•
Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade teeth should be visible below the workpiece.
•
Never hold piece being cut in your hands or across your leg. Secure the workpiece to a stable platform. It is important to support the work
properly to minimize body exposure, blade binding, or loss of control.
•
Always handle the saw using the insulated gripping surfaces when performing an operation where the blade may come into contact with
hidden wiring or its own cord. Contact with a “live” wire will also make exposed metal parts of the saw “live” and shock the operator.
•
When ripping always use a rip fence or straight edge guide. This improves the accuracy of cut and reduces the chance of blade binding
•
Always use compatible blades with the correct size and arbor hole shape (diamond versus round). Blades that do not match the mounting
hardware of the saw will not function correctly and will be potentially damaging to the saw and very dangerous for the operator.
•
Check and ensure that the Blade Maximum RPM is compatible with the saw before use.
•
Never use a damaged blade washers or arbor bolt. The blade washers and arbor bolt were specially designed for your saw to ensure
optimum performance and safe operation.
•
Do not use deformed, cracked, worn or otherwise damaged blades.
•
Never use the saw without the original guard protection system. Do not lock the moving guard in the open position. Ensure that the guard
operates freely without jamming.