4
USER MANUAL
JEFJKGAR03
3 TONNE TROLLEY JACK
www.jeffersontools.com
WARNING! BEFORE LIFTING ENSURE SECTION 1 SAFETY INSTRUCTIONS
ARE STRICTLY FOLLOWED.
1. Line up the holes in the two-piece handle and fasten with the assembly screw.
2. Loosen the location bolt at the side of the handle base. Insert jack handle and
tighten the bolt.
LIFTING
WARNING! ENSURE YOU PREPARE VEHICLE AND USE JACK ACCORDING TO
SECTION 1 SAFETY INSTRUCTIONS.
• Check that the ground upon which the jack will stand is level and solid.
• Position the jack saddle under the vehicle manufacturer’s recommended lifting point.
Position jack so as to avoid having to operate it from under the vehicle and so that
the handle can be moved up and down without hitting any part of the vehicle.
• Using the screw extension as necessary, raise the saddle to the lifting point. Ensure
that the saddle is correctly centred beneath the lifting point.
• Pump the handle up and down using full stroke until the required lift is achieved.
• Should the jack become overloaded, a safety overload valve will open, and stop the
vehicle from lifting.
• Lower the vehicle onto suitable axle stands before attempting any work.
LOWERING
• Ensure that the axle stands are removed and that there are no persons or obstacles beneath the vehicle,
or in the path of its descent.
• The lowering speed is controlled by the amount the release valve is opened.
Turn valve anti-clockwise and lower slowly and carefully.
WARNING: DO NOT USE THE JACK IF YOU BELIEVE IT HAS BEEN SUBJECTED TO ABNORMAL LOAD OR SHOCK.
INSPECT AND TAKE APPROPRIATE ACTION.
• Before each use check for broken, cracked, bent, or loose parts. Also check for any visible damage to welds, ram,
pump, body and base.
• If any suspect item is found remove jack from service and take the necessary action to remedy the problem.
• Periodically check the pump piston and piston rod for signs of corrosion. Clean exposed areas with a clean oiled cloth.
2. Features
3. Specification
4. Operation
Model Number: JEFJKGAR03
Length: 630mm
Capacity: 3 Tonne
Weight: NW: 29.3Kg / GW: 31Kg
Minimum Height: 130mm
Maximum Height: 465mm
• Heavy-duty steel construction provides
stability and endurance
• Swivel saddle and rear casters allows
smooth manoeuvring
• Lifting range: 130mm to 465mm
• Hydraulic oil by-pass system protects
ram from being over-extended
• Twin pump mechanism for smooth &
quick lifting
• Built-in safety valve protects against
jack over-loading
Warning: This equipment is designed
for lifting purpose only, always use axle
stands and wheel chocks to support the
vehicle.
FIG. 1
FIG. 2
