Jefferson JEFBLTSND075-230, Руководство пользователя

Страница: 10 / 20

10
USER MANUAL
v1.1
JEFBLTSND075-230
•
JEFBLTSND150-230
•
JEFBLTSND150-400
BELT LINISHER
www.jeffersontools.com
TROUBLESHOOTING
Symptom Possible Causes Solution
Linisher will not start 1. equipment unplugged from wall
or motor
2. fuse blown or circuit breaker
tripped
3. cord damaged 1. check all plug connections
2. replace fuse or reset circuit breaker
3. replace cord
Sanding belt does not
come up to speed 1. extension cord too light or too
long
2. motor not wired for proper
voltage
3. low current 1. replace with adequate size and length cord
2. refer to motor junction cover for proper wiring
3. contact a qualified electrician
Machine vibrates exces-
sively 1. stand on uneven floor
2. motor mounts are loose
3. tension spring is worn or broken 1. adjust stand so that it rests evenly on the floor
2. tighten motor mount bolts
3. replace spring
Abrasive belt keeps tear-
ing 1. belt is running in the wrong
direction 1. arrow on the sanding belt and machine should
be pointing in the same direction.
Sanded edge not square 1. table not square to sanding
plate 1. use a square to adjust table to sanding plate
Sanding marks on wood 1. work held still
2. wrong grit sanding belt
3. feed pressure too great
4. sanding against the grain 1. keep workpiece moving
2. use coarser grit for stock removal and fine grit
for finish sanding.
3. never force work into sanding platen
4. sand with the grain