Jefferson Professional Tools & Equipment JEFWASPET075HP, Руководство пользователя

Страница: 10 / 32

JEFWASPET075HP
7.5HP Petrol Pressure Washer
10
www.jeffersontools.com
Using the Spray Gun 8.
WARNING
Do not leave the pressure washer in bypass mode for more than 2 minutes at a
time. Water temperature inside the pressure washer pump will rise to
dangerous level and can result in damage to internal components within the
pump. Failure to follow this warning can result in personal injury and damage to
the equipment and will void the warranty.
Do not run the pump without a connection to the water supply. Any damage caused by such
use will void the warranty.
Always wear the appropriate safety equipment when using this equipment.
The high pressure water jet produced can cut through skin and underlying tissues resulting in
serious injury.
Never point the jet at people or animals. Beware of kickback when
spray gun trigger is pressed.
1. To engage the Trigger Lock, pull the lock up until it clicks into the slot.
2. To disengage the Trigger Lock push the lock down and into its original
position.
To operate the trigger:
Squeeze the trigger to start the water flow through the nozzle.
Release the trigger to stop the water flow.
Washing / Cleaning 9.
1. Grip the spray gun with both hands.
2. Point the nozzle in a safe direction and
squeeze the spray gun trigger to allow the pump
to purge air and impurities in the system and
then redirect the nozzle to the working surface.
3. When finished release the trigger gun
to stop the water flow.
Important: For most effective cleaning keep
the spray nozzle approximately 8 to 24 inches
away from the cleaning surface. When cleaning
tyres do not bring the nozzle within 6 inches
of the surface to avoid damage and potential
injury.