background image

USER MANUAL

JEFCIND050P-6.5 

· 

JEFCIND100P-6.5 

BELT DRIVEN AIR COMPRESSOR 

 6.5HP LONCIN PETROL ENGINE 

• 

10Bar 

www.jeffersontools.com

28

Jefferson Professional Tools & Equipment, or hereafter "Jefferson" warrants its customers that its products will be free of defects in workmanship 
or material. Jefferson shall, upon suitable notification, correct any defects, by repair or replacement, of any parts or components of this product 
that are determined by Jefferson to be faulty or defective. 

This warranty is void if the equipment has been subjected to improper installation, storage, alteration, abnormal operations, improper care, service 
or repair. 

Warranty Period

Jefferson will assume both the parts and labour expense of correcting defects during the stated warranty periods below. 

All warranty periods start from the date of purchase from an authorised Jefferson dealer. If proof of purchase is unavailable from the end user, then 
the date of purchase will be deemed to be 3 months after the initial sale to the distributor.  

2 Years

 

•  JEFCIND050P-6.5 •  JEFCIND100P-6.5

90 Days 

•  All replacement parts purchased 

outside 

of the warranty period 

Important: 

All parts used in the repair or replacement of warranty covered equipment will be subject to a minimum of 90 days cover or the 

remaining duration of the warranty period from the original date of purchase

.    

Warranty Registration / Activation

You can register and activate your warranty by visiting the Jefferson Tools website using the following address:

www.jeffersontools.com/warranty 

and completing the online form. Online warranty registration is recommended as it eliminates the need to  

provide proof of purchase should a warranty claim be necessary. 

Warranty Repair

 
Should Jefferson confirm the existence of any defect covered by this warranty the defect will be corrected by repair or replacement at an  
authorized Jefferson dealer or repair centre. 

Packaging & Freight Costs

 
The customer is responsible for the packaging of the equipment and making it ready for collection. Jefferson will arrange collection and 
transportation of any equipment returned under warranty. Upon inspection of the equipment, if no defect can be found or the equipment is not 
covered under the terms of the Jefferson warranty, the customer will be liable for any labour and return transportation costs incurred. 

These costs will be agreed with the customer before the machine is returned.   

*

 Jefferson reserve the right to void any warranty for damages identified as being caused through misuse 

  

Warranty Limitations

Jefferson will not accept responsibility or liability for repairs made by unauthorised technicians or engineers.  Jefferson's liability under this 
warranty will not exceed the cost of correcting the defect of the Jefferson products. 

Jefferson will not be liable for incidental or consequential damages (such as loss of business or hire of substitute equipment etc.) caused by 
the defect or the time involved to correct the defect. This written warranty is the only express warranty provided by Jefferson with respect to its 
products.  
 
Any warranties of merchantability are limited to the duration of this limited warranty for the equipment involved. 

Jefferson is not responsible for cable wear due to flexing and abrasion. The end user is responsible for routine inspection of cables for possible 
wear and to correct any issues prior to cable failure.   

  LIMITED WARRANTY STATEMENT 

Содержание JEFCIND050P-6.5

































Отзывы: