Jeep Wrangler 4xe 2021, Руководство пользователя

Страница: 34 / 88

32 GETTING TO KNOW YOUR VEHICLE
To raise the center head restraint, lift up on
the head restraint. To lower the center head
restraint, push the adjustment button, located
at the base of the head restraint, and push
down on the head restraint.
Center Head Restraint
NOTE:
Lower the center head restraint to avoid contact
with the seat bottom cushion when folding the
seat down.
To remove the center head restraint, push the
release button and the adjustment button at
the same time while pulling upward on the head
restraint.
To reinstall the head restraint, put the head
restraint posts into the holes and push downward.
Then, adjust the head restraint to the appropriate
height. Refer to “Occupant Restraint Systems” in
“Safety” in the Owner’s Manual for information on
child seat tether routing.
HOOD
O
PENING
Hood Latch Locations
1 — Release Button
2 — Adjustment Button
WARNING!

A loose head restraint thrown forward in a
collision or hard stop could cause serious
injury or death to occupants of the vehicle.
Always securely stow removed head
restraints in a location outside the occu -
pant compartment.

ALL the head restraints MUST be rein -
stalled in the vehicle to properly protect
the occupants. Follow the re-installation
instructions above prior to operating the
vehicle or occupying a seat.
WARNING!
Always place the ignition in the OFF position
before opening the hood. If the ignition is in
the RUN position and the Propulsion System
is active when the hood is opened, the engine
will automatically start, and persons not clear
of the vehicle could be injured by the engine’s
moving parts.
21_JL_H_SU_EN_USC_t.book Page 32