Jeep Renegade, Руководство пользователя

Страница: 35 / 212

BONNET
OPENING
Proceed as follows:
❒
pull lever A fig. 40 in the direction
indicated by the arrow;
❒
operate lever B fig. 41, in the
direction indicated by the arrow, and
raise the bonnet;
❒
release bonnet stay C fig. 42 from its
locking device D, then insert its end
in housing E on the bonnet.
23) 24)
CLOSING
Proceed as follows:
❒
hold the bonnet up with one hand
and with the other remove the stay from
the housing E and fit it back in locking
device D;
❒
lower the bonnet to approximately 40
centimetres from the engine
compartment and let it drop. Make sure
that the bonnet is completely closed
and not only fastened by the locking
device by trying to open it. If it is not
perfectly closed, do not try to press the
bonnet lid down but open it and repeat
the procedure.
25) 26)
IMPORTANT Always check that the
bonnet is closed correctly to prevent it
from opening while the vehicle is
travelling. Since the bonnet is equipped
with a double locking system, one for
each side, you must check that is
closed on both its side ends.
WARNING
23) Wrong positioning of the bonnet stay
may cause the bonnet to fall abruptly.
24) Raise the bonnet using both hands.
Before raising the bonnet make sure that
the windscreen wipers are not lifted from
the windscreen and are operating, that the
vehicle is at a standstill and that the electric
parking brake is engaged.
40
J0A0068C
41
J0A0069C
42
J0A0070C
33